BGAN......... Hughes 9502 BGAN M2M External Antenna Terminal The world’s most cost-effective, all-IP BGAN machine-to-machine satellite terminal with exceptionally low power consumption. Separate part number is C1/D2 and ATEX certified for hazardous locations. Hughes 9502 BGAN M2M External Antenna Terminal Hughes 9502 BGAN M2M Integrated Antenna Terminal Hughes 9450-C11 BGAN Mobile Satellite Terminal Hughes 9202M BGAN Land Portable Satellite Terminal Hughes 9202 BGAN Land Portable Satellite Terminal Hughes 9211 BGAN Satellite Terminal Hughes 9450-C10 BGAN Mobile Satellite Terminal Low Profile BGAN Hughes 9201 BGAN Inmarsat Terminal Harris Ruggedized BGAN Terminal The Hughes 9502 IP satellite terminal provides reliable connectivity over the Inmarsat Broadband Global Area Network (BGAN) for IP SCADA and machine-to-machine (M2M) applications. The Hughes terminal delivers affordable, global, end-to-end IP data connectivity enabling applications in industry sectors such as environmental monitoring, SmartGrid, pipeline monitoring, compressor monitoring, well site automation, video surveillance, and out-of-band management to primary site communications. The exceptional low power consumption (1W idle) of the Hughes 9502 makes it possible to provide end-to-end IP connectivity to sites that are off the grid. This breakthrough provides end-to-end IP connectivity to power-challenged locations that rely upon solar- battery arrays involving sensitive power budgets. The Hughes 9502 includes 10 meters of RF cabling, granting the user freedom to position the antenna remotely and away from the transceiver in complex installations while securing the SIM card inside a premise or enclosure to better protect against unauthorized use, theft, and vandalism. Future firmware releases would be uncommon, meanwhile any such modem update will qualify for no charge over-the-air (OTA) upgrades saving customers time and money. Features Hughes 9502 utilizes BGAN or M2M SIM cards Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface Ultra-low power consumption Transmit: < 20W Narrow beam w/o transmit: 3W Idle (regional beam): 1W Off (wake on packet): < 10mW (@ 12Vdc) Off (wake on packet): < 30mW (@ 24Vdc) Off (GPIO control): 0 W Relay mode passes WAN IP address to the connected RTU Supports Port Forwarding Security enhancements with extended layers of embedded security options Basic installation; no PC required Outdoor unit (ODU) can be pole mounted Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU) Built-in GPS receiver Interfaces Ethernet connection (RJ45) USB–Type B for connection to configuration PC RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver) TNC connection on the IDU to the external antenna Package Contents Hughes 9502 BGAN M2M Terminal IDU 10 meters RF antenna cable. Note: If cable length is changed, the cable loss needs to be 1.8 dB +/- 0.5 dB when measured at 1.6 GHz end-to-end which includes connectors External antenna (ODU) Accessories Modem (IDU) strap Antenna basic fixed mount kit Antenna azimuth elevation bracket - two versions: 1.6 inches (4cm) or 2 inches (5cm) Extended warranty options Related Collateral Data Sheets Low Profile BGAN (LPB) Terminal May 18, 2017 Hughes 9450-C11 BGAN Mobile Satellite Terminal May 18, 2017 Hughes 9211 BGAN Satellite Terminal May 18, 2017 Hughes 9201 Broadband Satellite IP Terminal May 18, 2017 Hughes 9502 BGAN M2M Terminal May 18, 2017 Hughes 9450-C10 BGAN Mobile Satellite Terminal May 18, 2017 Hughes 9202 BGAN Land Portable Satellite Terminal May 18, 2017 9202M BGAN Land-Portable Satellite Terminal Data Sheet